[Supply] FZJ500 Full Automatic Powder Compacting Press  |
|
Description:
|
It was developed on the base of Germany TPA 50T press, combining the practical situation of China, which has independent intellectual property. We have carried out lots of improvements for it since development, to make it meet the present situation of hard metal industry in China.
??.Technical Parameters
Type Value
Max Pressing Force 500KN
Max Demoulding Force 300KN
Max Supporting Force on Pressing Position 250KN
Max Die Returning Force 32KN
Upper Punch Stroke 200mm
Upper Punch Adjusting Stroke 0??220mm
Max Filling Depth 185mm
Max Pressing Stroke 95mm
Max Demoulding Stroke 90mm
Max Top Pressing Stroke 18mm
Stroke Frequency 6??30r/min
Motor Power 15kW
Air Pressure for Normal Operation 0.55Mpa??0.6 Mpa
Total Power 16.85kW
Pressure Adjusting Range for Preloading of Upper Punch Downward 0.05??0.55Mpa
Adjustable Stroke for Preloading 430??4760N
Max Air Consumption 583L/min
1. Apply angle encoder and PLC to control mechanical motions order of the press and motions of assisted systems.
2. Adjust the pressing frequency by frequency converter.
3. Apply secondary top pressing to improve the blank density, which has adjustable stroke and stable motion.
4. Pneumatic preloading protection in demoulding, with adjustable pressure and stroke. On continuous operation, the pressure value can be displayed immediately, and the preloading stroke can be monitored.
5. Adjustable forming zone. Pressing stroke, top pressing stroke, and pulling down stroke can be adjusted separately.
6. Auto cycle for lubricating oil, with oil filter of fine screen, of which the filter core is easy to replace.
7. Key components for pneumatic and electric control parts is of foreign brand.
8. Lower T shaped part has lock nut structure.
9. Electronic counter and accumulated operating time recorder equipped, displaying accuracy for the recorder can be 1min.
10. Powder feeding mechanism is composed by cylinder stainless steel silo of conical bottom. There??s conversion switch and pressure gauge equipped on the front of the electric control cabinet for compressing cylinder of powder box. The powder box is of PTFE bottom.
11. Powder feeding applies mechanical driving, which is stable and accurate, without vibration.
12. Electrical control cabinet door is strictly sealed, fan equipped for heat dissipation and air circulation.36V working table lamp is fixed on the cabinet.
13. Indicator lamps on the control panel are bright. There are 4 type buttons for pressing, ??inch/adjust??, ??Single??, ??Continuous??, ??Stop??. One button for ??Single??, ??Continuous??, and ??Stop?? respectively. Two buttons for ??inch/adjust??. Both of them should be pressed simultaneously to work. There are also indicator lamps for ??control connected??, ??failure (for lower air pressure, overpressure safety device starting), ??abnormal oil pressure??, ??motor rotating??, ??motor reversing??, ??motor stop?? and ??driving connected??. Master switch, ??emergency stop?? button are available as well. It also has inch astern function.
14. It has pressure keeping function, the time of which can be adjusted within 0-3min (pressing force 500KN).
15. Sealing sites and surfaces should be sealed effectively, without oil leakage. Oil pointer is available for hydraulic oil tank.
16. Suction device on negative pressure equipped.
17. Die adjusting tool set available.
|
|
Company: |
Xiangtan JiangLu Precision Machinery Co.,Ltd |
|
Address : |
1#, JingEr Rd, Jiuhua Industrial Park, Xiangtan-411202 |
|
Phone : |
86-732-3285706 |
|
Fax : |
86-732-8295102 |
Email: |
|
|
WebSite : |
http://www.xtjlpm.com/ |
|
Contact : |
|
|
Zip/Postal Code: |
|
|
|
|
|
|
